Time Yleismittarikalibraattori

Voltage DC 0 to ± 1050V ± 15ppm of setting
Current DC 0 to ± 22A ± 80ppm of setting

Voltage AC


1mV to 1050V (10Hz to 1MHz, sine-wave)


± 300ppm of setting
Current AC 10μA to 22A (20Hz to 1kHz, sine-wave) ± 0.05% of setting
Clamp Meter Adaptor x50 turn AC/DC Current up to 1100A (DC, 45 to 90Hz) ± 0.5%
Capacitance 1nF, 10nF, 100nF, 1μF, 10μF, 100μF (100V max) ± 0.25% of setting
Inductance 1mH, 1.9mH, 5mH, 10mH, 19mH, 50mH, 100mH, 190mH, 500mH, 1H, 10H ± 0.1% of setting
Decade Resistance 1Ω to 1GΩ (decade values) ± 20ppm of setting

Full Range Resistance


1Ω to 120MΩ variable


± 100ppm of setting
Conductance 1s to 1ns (Fixed values, decade steps) ± 20ppm of setting
Thermocouple Simulation -270 to 1800°C (Type J, K, R, T, S, B, E, N) ± 0.15°C

PT100 Simulation


-180 to 850°C


± 0.2°C

Oscilloscope Calibration
- Amplitude
- Frequency/Period
- Duty Cycle
- Fast-Rise
- 2.2GHz Sweep (opt 9769)



6mV to 200V and 6mV to 2V 50Ω (square-wave or DC)
0.1Hz to 100MHz / 10ns to 10s (fixed values 1, 2, 5 sequence)
3 frequencies: 100Hz, 1kHz, 10kHz, settable from 0 to 100%
<400ps. Bandwidth checking up to 400MHz
100MHz to 2.2GHz levelled sine-wave (0.5, 1, 1.5V pk-pk)



± 0.05%
± 0.1ppm (± 20ppm: 20-100MHz)

–
–
Amplitude ± 1%, Freq ± 20ppm

• Tekninen pdf dokumentti
• Tekninen pdf lisäosa