MX2202
HOBO MX-2200 sarjalla pystyt tallentamaan helposti lämpötila-arvoja, niin kosteissa, kuin vedenalaisissa kohteissa. Dataloggeri lähettää mitatun datan langattomasti Bluetoothin avulla puhelimeen. Puhelimessa on mahdollista luoda raportit ilmaisen HOBOmobile sovelluksen kanssa. Näin ollen et tarvitse enää kannettavaa tietokonetta mittauskohteissa.
MX2202
-Lämpötilan- ja valaistusvoimakkuudenmittaus 30m syvyyteen asti.
Temperature Sensor (MX2201 and MX2202)
Range
-20° to 70°C (-4° to 158°F) in air
-20° to 50°C (-4° to 122°F) in water
Accuracy
±0.5°C from -20° to 70°C (-4° to 158°F)
Resolution
0.04°C (0.072°F)
Drift
<0.1°C (0.18°F) per year
Response Time
17 minutes typical to 90% in air moving 1 m/s, unmounted
7 minutes typical to 90% in stirred water, unmounted
Light Sensor (MX2202)
Range
0 to 167,731 lux (15,582 lum/ft2)
Accuracy
±10% typical for direct sunlight (see Light Measurement on page 2 in the manual for more details)
Logger
Radio Power
1 mW (0 dBm)
Transmission Range
Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard
Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)
Logger Operating Range
-20° to 70°C (-4° to 158°F) in air
Logging Rate
1 second to 18 hours
Buoyancy (Fresh Water)
2g (0.07 oz) positive
Waterproof
To 30.5 m (100 ft)
Memory
96,000 measurements
Battery
CR2032 3V lithium, user replaceable
Battery Life
1 year typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off disabled in software.
2 years typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off enabled in software.
Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life.
To ensure proper battery installation, see Battery Information for detailed instructions on replacing the battery.
Time Accuracy
± 1 minute per month at 25°C (77°F)
Full Memory Dowload
Approximately 45 seconds; may take longer the farther the device is from the logger
Wetted Materials
Polypropylene case, EPDM O-ring
Dimensions
3.35 x 5.64 x 1.6 cm (1.32 x 2.22 x 0.63 inches)
Weight
12.75 g (.45 oz)