HOBO MX2204 TidbiT waterproof tempe

Temperature Sensor (MX2203 and MX2204)

Range
MX2203: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water
MX2204: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water, maximum sustained temperature in water 30°C (86°F)

Accuracy
±0.25°C from -20° to 0°C (±.45°F from -4° to 32°F)
±0.2°C from 0° to 70°C (±0.36°F from 32° to 158°F)

Resolution
0.01°C (0.018°F)

Drift
<0.1°C (0.18°F) per year

Response Time
MX2203: 17 minutes typical to 90% in air moving 1 m/s, unmounted;
7 minutes typical to 90% in stirred water, unmounted
MX2204: 15 minutes typical to 90% in air moving 1 m/s, unmounted;
4 minutes typical to 90% in stirred water, unmounted



Logger

Radio Power
1 mW (0 dBm)

Transmission Range
Approximately 30.5 m (100 ft) line-of-sight

Wireless Data Standard
Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)

Logger Operating Range
-20° to 70°C (-4° to 158°F)

Logging Rate
1 second to 18 hours

Buoyancy (Fresh Water)
MX2203: 3.1 g (0.11 oz) negative
MX2204: 7.6 g (0.27 oz) negative

Waterproof
MX2203: To 122 m (400 ft)
MX2204: To 1,524 m (5,000 ft)

Water Detection
Water conductivity level of 100 µS/cm or greater necessary for reliable detection of water. Deionized water or water below 100 µS/cm may not be detected.
The water conductivity circuit may not reliably detect water that has frozen around the electrodes, i.e. below 0°C (32°F).

Memory
96,000 measurements

Battery
CR2477 3V lithium, user replaceable in MX2203, non-replaceable in MX2204

Battery Life
3 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off disabled in software.
5 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off or Bluetooth Off Water Detect enabled in software.
Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life.
To ensure proper battery installation, see Battery Information for detailed instructions on replacing the battery in the MX2203 logger.

Time Accuracy
± 1 minute per month at 25°C (77°F)

Full Memory Dowload
Approximately 45 seconds; may take longer the farther the device is from the logger

Wetted Materials
MX2203: Polypropylene case, EPDM O-ring, stainless steel screws, Santoprene® (TPE) boot
MX2204: Epoxy case, Santoprene (TPE) boot

Dimensions
MX2203: 4.45 x 7.32 x 3.58 cm (1.75 x 2.88 x 1.41 inches)
MX2204: 4.06 x 6.99 x 3.51 cm (1.6 x 2.75 x 1.38 inches)

Weight
MX2203: 36.2 g (1.28 oz)
MX2204: 32.8 g (1.16 oz)